Sculpting Frames & Arches
-
Visit product page →1.2m ARCH Circle Frame GOLD PMARCH-GO
-
Visit product page →1m Circle Balloon Frame NO Mesh - white #B459-1
Also available in 2m size B459-2
-
Sold outVisit product page →1m Circle Balloon FRAME with Mesh - White #B458-1
**It is highly recommended sand bags (or equivalent) be used to support the base of the frame, especially if balloon or acrylic is being attached.**
-
Sold outVisit product page →2m Balloon Frame WHITE No Mesh (with Improved Base) #B459-2
Dimensions of box: 104 x 13 x 104cm
Weight: 11kg
**It is highly recommended sand bags (or equivalent) be used to support the base of the frame, especially if balloon or acrylic is being attached.**
-
Sold outVisit product page →2m Balloon Frame WHITE with Mesh (with Improved Base) #B458
Please note, this is a budget item and thus imperfections may vary with each frame - the center of the frame does not perfectly lineup, there will be a small gap between the 4 pieces. In order to improve the alignment clear cable ties work best.
**It is highly recommended sand bags (or equivalent) be used to support the base of the frame, especially if balloon or acrylic is being attached.**
-
Visit product page →2m Disc Fabric Cover Gold #B459G
Designed to be used as an Acrylic Disc transportation cover.
The cover will not zip all the way around the disc while attached to the frame.
-
Visit product page →2m Disc Fabric Cover Light Blue #B459CP
Designed to be used as an Acrylic Disc transportation cover.
The cover will not zip all the way around the disc while attached to the frame.
-
Visit product page →2m Disc Fabric Cover Light Pink #B459CB1
Designed to be used as an Acrylic Disc transportation cover.
The cover will not zip all the way around the disc while attached to the frame.
-
Visit product page →2m Disc Fabric Cover Rose Gold #B459RG
Designed to be used as an Acrylic Disc transportation cover.
The cover will not zip all the way around the disc while attached to the frame.
-
Visit product page →2m Disc Fabric Cover Silver #B459CS
Designed to be used as an Acrylic Disc transportation cover.
The cover will not zip all the way around the disc while attached to the frame.
-
Visit product page →2m Disc Fabric Cover White #B459CW
Designed to be used as an Acrylic Disc transportation cover.
The cover will not zip all the way around the disc while attached to the frame.
-
Sold outVisit product page →Dimensions:
105 x 7 x 51cm
90 x 7 x 51cm
75 x 7 x 51cm
60 x 7 x 51cm
Total Weight: 11kg
**It is highly recommended sand bags (or equivalent) be used to support the base of the frame, especially if balloon or acrylic is being attached.**
-
Visit product page →Aeropole System Kit (6 Per Case) #12281 Seven Poles, 2 base plates, pin set
-
Sold outVisit product page →Aeropole System-Circle Arch Adapter #17581 - Each
Please note this is an adapter, not a kit.
The adapters bolt onto each base plate, and then 5-7 poles can be made into a circular arch.
-
Sold outVisit product page →Balloon Decorating Frame Large Rectangular - white #B460- single
Dimensions: 105 x 7 x 51cm
Weight: 5kg
-
Visit product page →Balloon Hoop Decoration GOLD #110719
Plastic 71cm. Table Top or Hangable Use. Includes Hoop, Base, 30cm of String & 50 Adhesive Tabs. Fill Base with Water for Table Top Use
-
Visit product page →Heart Sculpting Frame #71448 - Each
-
Sold outVisit product page →Fully adjustable frame, maximum possible configuration is 2260mm wide x 2030mm high, easily remove or add rods to customize the width or the height. Multiple kits can be joined together for even larger configurations. Perfect for backdrops or shimmer sequin walls.
Spare corners, T connectors and centre threads are also available for purchase to help customize the size and scale of the frame.
Box dimensions: 41cm x 7cm x 41xm
Weight of the box: 15kgs
-
Visit product page →Height Adjustable Circle Metal Frame with Metal Base (2.4m High x 960mm Wide) #B410
-
Hula Hoop White Frame 73cm diameter #HAB452 Unassembled - EachVisit product page → -
Visit product page →Indoor Balloon ARCH Frame 300cm x 300cm with water bases 3kg #B428 - Each
-
Visit product page →Metal Plinth Frame White 285mm x 285mm x 500mm #B485-AW - Each
-
Visit product page →Metal Plinth Frame White 300mm x 300mm x 1100mm #B485-CW - Each
-
Visit product page →Metal Plinth Frame White 300mm x 300mm x 900mm #B485-BW - Each
-
Visit product page →The Base Plate is a 30cm Square weighing 1.7kg, The Rod is Hollow and is 1.8 metres tall. The Base Plate also has four holes so that it is possible to drill to the ground if needed.
-
Visit product page →Replacement SCREWS White for Frames #HAB458-5
-
Visit product page →Star Sculpting Frame #71445 - Each
-
Visit product page →Table Arch Fibreglass with Metal Clamps #HAB409 - Each
-
Visit product page →Telescopic Balloon BASE Pro Pack #AP222449- each
This convenient retail pack offers contains one balloon base with telescopic pole and balloon holder.
Transform your event decor effortlessly with Oaktree's Telescopic Balloon Base Pro. A versatile and reliable solution for creating eye-catching balloon displays. This user-friendly balloon stand kit is perfect for both beginners and professionals, offering an easy-to-assemble design for various occasions.
Key Features:
- Oaktree Telescopic Balloon Pole: Extendable and durable, this pole adjusts from a compact 47cm to an impressive 200cm, allowing for your creative needs whether it's table centre pieces or towering balloon columns.
- Balloon Cup Head: This is designed to hold your balloons securely, ensuring a flawless presentation and can be used with jumbo latex or foils.
- Fillable Balloon Base Weight: the 25.5cm base can be filled with sand or water, providing stability to your balloon display
- Sure Lock System: A unique feature that ensures the telescopic pole stays firmly attached to the base, eliminating any worries about your display toppling over or detaching from the base.
- Ideal for a variety of events, the Oaktree Telescopic Balloon Base Pro can be used by professionals and costed into jobs or sold in store for the home DIY decorator. Balloons are not included, the kit is a blank canvas for your creativity, allowing you to design bespoke balloon arrangements.
Product images are for inspirational purposes only. Balloons not included.
Maximum height 200cm
Minimum height 47cm
Approximate base weight when filled: 2kg Sand, 1.25kg Water
